Grafik für Series 260HC - Card Lok Retainer in Schroff - Europa, Mittlerer Osten, Afrika und Indien
+/- Zum Zoomen den Mauszeiger über das Bild halten

Series 260HC

Artikelnummer: 260HC
  • Profile 6.35 mm (.250 in) x 6.26 mm (.270 in)
  • For cold wall applications
  • Available with black anodized, hard black anodized, or electroless nickel plating
  • Min expansion 6.86 mm (.270 in)
  • Screw actuated
  • Average clamp force (4.80", black anodized) = 1256 lbs
  • 5 segment, shafted design
  • Flexible mounting options
  • Length 96.5 mm (3.80 in) to 172.7 mm (6.80 in), 12.7 mm (0.5 in) increments
  • Weight 0.95g/cm (.085 oz/in)

Order Information:

  • For customized product contact or 1-800-854-7086. Please provide drawing, quality clauses, and purchase order requirements.
  • Designed to retain PCBs in rugged, heavy shock and high vibration environments commonly found in Military and Defense and commercial aerospace systems. In addition to PCB retention, Card and Wedge Loks also aid in thermal transfer from the PCB to the cold wall via conduction, by improving the interface between the PCB and the chassis rail.


    The 260HC's unique wedge design provides more than triple the clamping force of similarly sized Card Loks. Like all shafted Card Loks, the Series 260HC has a ridged shafted design for a more uniform clamping force over the length of the card lok, while maintaining wedge and body alignment for easier installation. The 260HC is designed to be a drop in replacement for most Series 260 Card Lok applications.


    The Card Lok mounts to the PCB either by screws or rivets, with one Card Lok on the top of the PCB and one on the bottom. Often Card Loks are installed within a conduction cooled card cage where the PCB, with the two Card Loks attached, is then installed into the cold wall channels. When actuated, the Card or Wedge Lok clamps the PCB firmly to the cold wall to facilitate board retention and thermal transfer.


    From time to time, Pentair Equipment Protection may modify its product specifications to be in conformity with applicable industry, military or other relevant standards. Unless otherwise mutually agreed in writing, cancelled or superseded military specifications may be certified to the latest or superseding specifications. Products manufactured in conformity with such specifications will be deemed fully compliant whether or not you have been notified of such modifications, even if different from the original specification or those referenced by the customer.
    Series 260HC
    Recommended Gap Width PCB + 7.37 mm (.290 in)
    Recommended Torque 68 N-cm (6 in-lbs), with "L" option 90 N-cm (8 in-lbs)
    Kein Zubehör verfügbar